coordinated machines 762x458

Machine-to-machine communication that increases productivity.

Overview

NavCom’s Machine Control solutions help you connect with your worksite. Coordinated machines facilitate machine-to-machine communication, which results in improved productivity, lower costs and improved yields. NavCom’s precise positioning and heading receivers can assist your coordinated machine solution with real-time measurements and data.

sf 3050hb and sf 3050hr 204x138

The SF-3050HB & SF-3050HR for Coordinated Machine Applications

NavCom's Heading Base (HB) and Heading Rover (HR) systems combine the SF-3050 StarFire GNSS receiver, the ANT-3001R GNSS/L-Band Antenna, and a Mini Null Modem adaptor to create a complete heading base and rover solution. The heading-enabled SF-3050 allows a heading accuracy of up to .1° RMS with a 3-meter antenna separation.

View the SF-3050
View the ANT-3001R

   
rtk add 204x138

RTK Add-ins Improve Performance

In addition to traditional RTK accuracy, NavCom’s powerful combination of RTK add-ins help reduce outages while providing extended coverage and saving our users valuable time and effort. Ultra RTK provides RTK-level accuracy of up to 40 km distance from a base station, and RTK Extend leverages the StarFire Network for continuous RTK positioning when the RTK radio communication signal is blocked or out of range.


Learn more about RTK Extend

Learn more about Ultra RTK

 

GNSS Receivers

sf 3050 204x138

SF-3050

The SF-3050HB and HR solutions provide accurate heading options for your machine control needs.

View the SF-3050

 

Antennas

ant 3001r 204x138

ANT-3001R GNSS Aerial Antenna

Ideal for high-precision applications and supporting multi-constellation receivers, the ANT-3001R Antenna is a rugged, lightweight antenna designed for machine control applications.

View the ANT-3001R

NavCom’s family of antennas support GPS, GLONASS and Galileo as well as WAAS, EGNOS and StarFire™ plus other SBAS signals.

Learn more about NavCom’s Antennas

 

Augmentation

ultra rtk 204x138

Ultra RTK

NavCom’s Ultra RTK increases your range by allowing users to achieve RTK accuracy of up to 40 km distance from the base station.

Learn more about Ultra RTK

   
rtk extend 204x138

RTK Extend™

Oftentimes during a survey, clear communications with your base station aren’t guaranteed. Instead of suffering from wasted downtime, NavCom’s exclusive RTK Extend™ feature carries centimeter-accurate positioning for up to 15 minutes through communication outages.

Learn more about RTK Extend

   
starfire 204x138

StarFire™

For Aerial Survey Applications, StarFire allows users to achieve 5 cm positioning accuracy anywhere in the world and to eliminate the dependency on postprocessing with ground-based reference stations.

Learn more about StarFire

excavator control 762x458

Bucket placement with accurate heading and precise positioning.

Overview

NavCom’s Machine Control solutions help connect you more closely with your worksite. Mass excavation projects require accurate 3D positioning of the bucket along with cross slope and heading. NavCom’s heading and precise positioning receivers combined with our powerful suite of RTK tools can help you to quickly and accurately determine the blade position and to build your excavator control solutions.

sf 3050hb and sf 3050hr 204x138

The SF-3050HB & SF-3050HR for Excavator Control Applications

NavCom's Heading Base (HB) and Heading Rover (HR) systems combine the SF-3050 StarFire GNSS receiver, the ANT-3001R GNSS/L-Band Antenna, and a Mini Null Modem adaptor to create a complete heading base and rover solution. The SF-3050 is Heading Enabled and allows a heading accuracy of up to 0.1° RMS with a 3-meter antenna separation.

View the SF-3050
View the ANT-3001R

   
rtk add 204x138

RTK Add-ins Improve Performance

In addition to traditional RTK accuracy, NavCom’s powerful combination of RTK add-ins help reduce outages while providing extended coverage and saving our users valuable time and effort. Ultra RTK provides RTK-level accuracy of up to 40 km distance from a base station, and RTK Extend leverages the StarFire Network for continuous RTK positioning when the RTK radio communication signal is blocked or out of range.


Learn more about RTK Extend

Learn more about Ultra RTK

 

GNSS Receivers

sf 3050 204x138

SF-3050

The SF-3050HB and HR solutions provide accurate heading options for your machine control needs.

View the SF-3050

 

Antennas

ant 3001r 204x138

ANT-3001R GNSS Aerial Antenna

Ideal for high-precision applications and supporting multi-constellation receivers, the ANT-3001R Antenna is a rugged, lightweight antenna designed for machine control applications.

View the ANT-3001R

NavCom’s family of antennas support GPS, GLONASS and Galileo as well as WAAS, EGNOS and StarFire™ plus other SBAS signals.

Learn more about NavCom’s Antennas

 

Augmentation

ultra rtk 204x138

Ultra RTK

NavCom’s Ultra RTK increases your range by allowing users to achieve RTK accuracy of up to 40 km distance from the base station.

Learn more about Ultra RTK

   
rtk extend 204x138

RTK Extend™

Oftentimes during a survey, clear communications with your base station aren’t guaranteed. Instead of suffering from wasted downtime, NavCom’s exclusive RTK Extend™ feature carries centimeter-accurate positioning for up to 15 minutes through communication outages.

Learn more about RTK Extend

   
starfire 204x138

StarFire™

For Aerial Survey Applications, StarFire allows users achieve 5cm positioning accuracy anywhere in the world, eliminating the dependency on post-processing with ground based reference stations.

Learn more about StarFire

machine control 762x458

Precise Positioning for Gantry Crane Machine Control Applications

NavCom for Machine Control Applications

Automate your worksite. Precisely dig trenches or excavate. Level the toughest of grades. NavCom has your Machine Control needs covered with precise positioning and heading receivers that offer dual GNSS signals for accurately measuring cross slope, position and heading to provide the proper data for these complex, earthmoving applications. Combined with our powerful suite of RTK add-ins, RTK Extend™& Ultra RTK, your worksite will go the distance, up to 40 km, even through radio communication outages. NavCom solutions for machine control applications will help improve productivity, lower costs and increase yields for your most demanding projects.

coordinated machines 144x98Coordinated Machines

Leverage machine-to-machine communication to improve productivity.

Coordinated Machines

excavator control 144x98Excavator Control

Accurately position your bucket with excavator control assistance.

Excavator Control

grade control 144x98Grade Control

Control your cutting edge and blade placement with RTK assistance.

Grade Control

grade control 762x458

Blade control with accurate heading and precise positioning

Overview

NavCom’s Machine Control solutions help connect you more closely with your worksite. Mass excavation projects require accurate 3D positioning of the bucket along with cross slope and heading. NavCom’s heading and precise positioning receivers combined with our powerful suite of RTK tools can help you to quickly and accurately determine blade position and help you build your excavator control solutions.

sf 3050hb and sf 3050hr 204x138

The SF-3050HB & SF-3050HR for Grade Control Applications

NavCom's Heading Base (HB) and Heading Rover (HR) systems combine the SF-3050 StarFire GNSS receiver, the ANT-3001R GNSS/L-Band Antenna and a Mini Null Modem adaptor to create a complete heading base and rover solution. The heading-enabled SF-3050 allows a heading accuracy of up to 0.1° RMS with a 3-meter antenna separation.

View the SF-3050
View the ANT-3001R

   
rtk add 204x138

RTK Add-ins Improve Performance

In addition to traditional RTK accuracy, NavCom’s powerful combination of RTK add-ins help reduce outages while providing extended coverage and saving our users valuable time and effort. Ultra RTK provides RTK-level accuracy of up to 40km distance from a base station, and RTK Extend leverages the StarFire Network for continuous RTK positioning when the RTK radio communication signal is blocked or out of range.


Learn more about RTK Extend

Learn more about Ultra RTK

 

GNSS Receivers

sf 3050 204x138

SF-3050

The SF-3050HB and HR solutions provide accurate heading options for your machine control needs.

View the SF-3050

 

Antennas

ant 3001r 204x138

ANT-3001R GNSS Aerial Antenna

Ideal for high-precision applications and supporting multi-constellation receivers, the ANT-3001R Antenna is a rugged, lightweight antenna designed for machine control applications.

View the ANT-3001R

NavCom’s family of antennas support GPS, GLONASS and Galileo as well as WAAS, EGNOS and StarFire™ plus other SBAS signals.

Learn more about NavCom’s Antennas

 

Augmentation

ultra rtk 204x138

Ultra RTK

NavCom’s Ultra RTK increases your range by allowing users to achieve RTK accuracy at up to 40km distance from the base station.

Learn more about Ultra RTK

   
rtk extend 204x138

RTK Extend™

Oftentimes during a survey, clear communications with your base station aren’t guaranteed. Instead of suffering from wasted downtime, NavCom’s exclusive RTK Extend™ feature carries centimeter-accurate positioning for up to 15 minutes through communication outages.

Learn more about RTK Extend

   
starfire 204x138

StarFire™

For Aerial Survey Applications, StarFire allows users to achieve 5cm positioning accuracy anywhere in the world, eliminating the dependency on postprocessing with ground based reference stations. 

Learn more about StarFire